19
Installing your hob in complete safety
fix the clips on to the hob
4 cm mini
26 ,5 /56 /75 cm
49 cm
4 cm mini
4 cm mini
A seal exists for preventing
any humidity getting under
the hob.
-Stick the seal under the rim
of the hob and lower the
hob into position on the
worktop.
-This seal is supplied in the
sachet; stick it in place
beneath the hob.
93,1
52
48,8
89,3
5,9
dimensions in cm
90
mini 5 cm
Kit d'isolation (SAV)
mini 4 mm
A
bove an oven
4 cm mini
Ensure that the unit crossbar does not block the air
passage, make a bevel if necessary.
A
bove a cupboard or drawer unit
Gap
MINI 4 mm
I
f the appliance underneath your hob
produces excess heat
:
this will be detected by a safety device incorporated
into your induction hob. A high temperature will be
indicated by a
series of dashes
or
F7
will appear in
the display.
If this happens we suggest you either create an
opening in the side of the unit and/or install an
insulation kit available from the After-Sales Dept (ref
75X1652), which will protect your hob from the heat
generated beneath it.
Providing the advice on ventilation given above is
followed, your hob can be installed above any piece of
kitchen equipment.
Always ensure that the air vents beneath
the hob are kept clear.
Your induction hob must always be
adequately ventilated.
Opening in the side
of the unit approx
8 cm x 5 cm
Insulation kit (after-sales service)
99627381_ML_A.qxd 20/02/03 09:07 Page 19
