6
EN
1 / INSTALLING YOUR APPLIANCE
Your appliance should be positioned so that the mains switch is accessible.
These hobs must be connected to the mains using a socket in compliance with publication CEI
60083 or an all-pole circuit-breaker device in compliance with the installation rules in force.
When power is first supplied to your hob, or after an extended power cut, an indicator light will
appear on the control panel. This information will disappear after 30 seconds.
Connection
Separate the 2 phase wires (L1 and L2) before
connection.
N
L
Green/yellow
Blue
Black or grey
Brown
Neutral
Earth
Phase
N
L1 L2
Blue
Green/yellow
Black-grey
Brown
•Hook-up of 220-240V
~
Warning
If the cable is damaged it must be
replaced by the manufacturer, its after-
sales service or a person with a similar
qualification to prevent danger.
With hook-up of 400 V 2N three phase, verify
that the neutral wire is properly connected.
•Hook-up of 400V 2N
~
-
16A
32A
Earth
Neutral
Phase
N
L
Green/yellow
Blue
Brown
32A
Earth
Neutral Phase
•Hook-up of 220-240V
~
N
L
Green/yellow
Blue
Brown
16A
Earth
Neutral Phase
Separate the wires before connection.
Neutral
Earth
Phase
N1
L1 L2
Blue
Green/yellow
Black-grey
Brown
•Hook-up of 2x230V 2L+2N
~
-
16A
N2
