Installation Guide
EN
Installation
Your appliance should be positioned so that the mains switch is
accessible. The distance between the edge of your appliance
and the side and rear walls (or partitions) must be at least four
centimetres (area A).
Your appliance can be easily integrated above a cabinet, an oven
or a build-in household appliance. Simply verify that the air in-
takes and outlets are free of obstruction, poor ventilation can af-
fect both the performance of your appliance and reduce its
lifespan.
Stick the foam gasket to the bottom of your appliance. This will
allow you to achieve an airtight seal with the worktop.
Attach the clips to the hob if supplied.
Cut-out Information.
Please ensure the correct cut out size for your appliance. Details of the cut out sizes are shown on
page 4.
L’ being the width (left to right)
l’ the depth of the cut out (front to back
)
When installing above a cupboard please ensure a
gap for ventilation is provided to the rear of the
cupboard. You should also ensure that the ventila-
tion slots in the front of the appliance are not
blocked / obscured in any way.
It may be necessary to cut the work-surface or
cupboard carcass to ensure adequate air flow.
When installing your appliance above a drawer or
shallow cupboard, it may be necessary to remove
the carcass support rail from the housing in order
to ensure a 4mm air gap is maintained.
Installing above a cupboard
Installing above a drawer
8
Summary of Contents for DTi1049
Page 1: ...DTi1049 Induction Hob...
