DeDietrich DTG1410X, Manual For Installation And Use

Page: 20 / 29

20
What your hob looks like?
Installing your hob in all simplicity
Fitting recommendation
According to the Gas Safety Regulations of Hong Kong, any gas installation works including the
installation of appliances and connection tubing, must be undertaken by registered gas installers who
are registered for that appropriate classes and be employed by registered gas contractors.
Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure)
and the adjustment conditions of the appliance are compatible.
This appliance must be installed and connected in compliance with the regulations in force, and used only in a
well-ventilated area. Consult the instructions before installing and using this appliance.
Since this appliance is not connected to a combustion products evacuation device, particular attention should be given
to the relevant requirements regarding ventilation.
On this subject, combustion can take place only if oxygen from the air is present, so this air must be constantly
renewed and the combustion products must be evacuated (a minimum air input of 2 m3/hour per kW of gas energy is
required).
E.g.: Hob with 2 gas-rings
Total power: 4.5kW
4.5 kW x 2 = 9m3/h minimum flow-rate.
Width Depth Height
Standard cutout
26.5cm 48cm 5.1cm
Outside dimensions above the work
surface
31cm 51cm 4.8cm
2. Extra-fast burner
3kW*
1. Semi-fast burner
1.5kW*
(*Powers in Hong Kong Town gas)