8
•
2
USE
2.1
POWER MANAGEMENT
Model only
The total power consumed by your hob
must be consistent with the power of
your electrical installation.
By default, the hob’s power is set to its
highest level.
To increase or reduce the power level
:
- When applying power for the first time
(within 30 seconds) press any key and
the maximum power level will be
displayed
(2.1.1).
To reduce the power, press the – key
(2.1.2)
until the desired power setting is
reached.
To confirm, give a short press on the
and buttons
together
(2.1.3)
.
- At any other time, if your hob is in
standby (with or without residual heat),
press and hold the
and
buttons together to change the power.
Available power levels:
Ensure that the power selected is
compatible with the hob's fuses.
Depending on the power level selected,
the division of power between the
cooking zones will be affected.
hob power in
kW
Fuses / Circuit
breaker (A)
7,4
32
4,6
20
3,6
13
3
13
Power Management
Power Management
2.2 CHOICE OF COOKWARE
Most cookware is compatible with
induction. Only glass, terracotta,
aluminium without a special base,
copper and some non-magnetic
stainless steels do not work with
induction cooking.
We suggest that you choose
cookware with a thick, flat
bottom.
The heat will be distributed
better and cooking will be more uniform.
Never leave an empty pan to heat
unattended.
Avoid putting cookware on the
control panel.
2.3 COOKING ZONE SELECTION
There are several cooking zones
available. Select one which is suitable,
based on the size of the pan. If the base
of the cookware is too small, the power
indicator will start to flash and the
cooking zone will not work, even if the
cookware’s material is recommended for
induction. Take care not to use pans
which are smaller in diameter than the
cooking zone (see table)
Diameter of
bottom of
cookware
10 to 18 cm
11 to 22 cm
12 to 24 cm
15 to 32 cm
18 cm, oval
fish kettles
11 to 22 cm
Max. power of
cooking zone
(Watts)
2400
2800
3700
3700
3700
3700
2800
Diameter of
cooking zone
16 cm
18 cm
23 cm
28 cm
Horizone
Duozone
1/2 zone