79
2 / USING YOUR APPLIANCE
EN
•How to set the time
-
When plugged in
The display flashes 12:00 (fig.1).
Set the time by pressing the + or - buttons
(holding your finger on the button allows you
to scroll through the numbers rapidly) (fig.2).
Example: 12:30
Press the
button to confirm.
The display stops flashing (fig.3).
fig.1
fig.2
fig.2
fig.3
fig.1
- To set the time on the clock
Press on the
button for a few seconds
until the display starts flashing (fig.1), then
release.
Audible beeps indicate that it is now possible
to set the time.
Adjust the clock setting with the + and -
buttons (fig.2).
Press the
OK
button to confirm.
Warning
If the OK touch control is not
pressed, the adjustment will be
automatically recorded after a few
seconds.
USING THE PROGRAMMER
•