ENGLISH
91
- Place the appliance in a dry, well-ventilat-
ed place.
- Do not place it on balconies or terraces:
high summer temperatures and low winter
temperatures may prevent the appliance
from operating correctly, or even damage it.
- Do not install it near to a heat source, such
as an oven or radiator.
- The appliance has been designed to oper-
ate at a certain optimum ambient tempera-
ture. This means that it has been designed
for a special "climate type". This type of cli-
mate is clearly shown on the specifications
plate in side the refrigerator, on the lower
left-hand side. Outside this temperature
range, the performance of the appliance
may be impaired.
- Keep a minimum distance between the
refrigerator and other items of furniture in
order to allow the air to circulate on all
sides.
- Place the appliance at a suitable distance
from the wall. There are buffers fitted to
ensure the minimum distance.
Installing the appliance
Only if the appliance is installed correctly according to the instructions given in
this "Installation and user manual" will you be able to preserve tour food in good
condition, and optimise energy use.
Climate type
Ambient temperature
SN
SN/ST
N
ST
T
from +10 °C to +38 °C
from +16 °C to +32 °C
from +16 °C to +38 °C
from +10 °C to +32 °C
from +16 °C to +43 °C
Once the appliance has been installed, adjust the legs so that it leans slightly backward:
this will help the door to close correctly.
Before loading food, clean the inside and outside of the appliance with bicarbonate
of soda dissolved in water (1 dessert spoon of bicarbonate to 4 litres of water).
Never use alcohol, abrasive powders or detergents that could damage the surfaces.
See the chapter on "Cleaning the appliance".
•
Type of connection: 220-240 V with earth.
•
Do not use adaptors or extension leads.
•
Prevent the cable from coming into contact with the compressor.
•
Prevent the cable from becoming trapped under the refrigerator.
Electrical connections
Condenser buffer
FQ8X003D2 10/3/08 09:10 Página 91
