
16
3.6 Checking micro-switches and sensors
N°
Description
Activated
Deactivated
Notes
1
Geared motor micro-
switch WORK
Distributor in WORK
position
Distributor not in
WORK position
2
Geared motor micro-
switch HOME
Distributor in HOME
position
Distributor not in
HOME position
3
Front command strip
micro-switch
Command strip closed
Command strip
open
5
COFFEE GROUNDS TRAY
micro-switch
Tray present
Tray absent
6
DISTRIBUTION GROUP
micro-switch
Present
Absent
7
DOOR Micro-switch
Door closed
Door open
8
FLOW METER
The technician
can check the
impulses
9
COFFEE GRINDER
IMPULSES
The technician
can check the
impulses
0
WATER LEVEL in the
tank
Level is OK
Level is LOW
A
WATER ALARM micro-
switch
Water detected in the
bottom of the machine
No water detected
in the bottom of the
machine.
M Coffee holder empty
There is no coffee
There should be
coffee.
This is derived
and not
hardware data.
R
CLOCK (shows seconds) Even seconds
Odd seconds
It should flash at
1 HZ
K
FRONT FACE PRESENT
Present
Absent
0-8 COFFEE GRINDER
SETTINGS
Factory settings
*
COFFEE GRINDER
SETTINGS SAVED
Not saved
Saved
Summary of Contents for DED700X
