Dedicated Micros DV-IP NV4 Installation Manual Download Page 34

Page: 34 / 244

NV4

Recording

Those camera channels that are currently recording are highlighted

light green. Those not recording will appear

dark green.

Cam Status

Those camera channels where the connection is deemed to be

functioning correctly will be highlighted light green. Those deemed

to have failed will appear red. Camera channels with no connected

camera will appear dark green.

Alarm Status (Yellow)

Select to open to the Status->Alarm page.

Rem Codec (Blue)

Select to open to the Remote Codec Status page

Refresh (Purple)

Refreshes the information on the current page.

Intelligent Security & Fire Ltd

Summary of Contents for DV-IP NV4





















































































































































































































































Search results

Summary of Contents for DV-IP NV4

Reviews:

Related manuals for DV-IP NV4

Brands by name

Popular brands

Dedicated Micros DV-IP NV4, Installation Manual

Search results

Summary of Contents for DV-IP NV4

Reviews:

Related manuals for DV-IP NV4

Brands by name

Popular brands