dedaelementi.com
Front hub
→ Remove the pressure end caps installed
on the front hub (standard TA 12×100 mm)
and replace them with those you need
(QR 100 mm or TA 15×100 mm)
→ Install the end cap with the smaller flange
diameter (1) on the disc brake rotor side
and the one with the bigger flange diameter
(2) on the opposite side
→ Make sure the washer (3) is correctly placed
in its seat on the end cap (4) before inserting
caps into the hub
8.1 Conversion end caps kit mounting
1
3
3
2
4
4
Summary of Contents for Gera Carbon
Page 15: ...15 Ruote Gera Carbon Note...
Page 27: ...27 Wheels Gera Carbon Notes...
