DeCrane Aerospace Audio International LCDW-9320-101-x Installation Manual
Document # 540363, Rev A1, 11/2008
Page 13 of 18
functions from the setup menus without advance notification to the
user. To access the Main Menu, press the “MENU 1” button, which
will cause the Monitor setup menu to be displayed on the
LCDW-9320-101-x. To scroll through the setup modes, press the
“MENU 2” button to scroll forward or the “MENU1” button to scroll
back. When in the desired mode for setup monitor, press either
LEFT (-) or RIGHT (+) to change the selected value. Pressing the
LEFT button decreases the selected value and pressing the RIGHT
button increases the selected value. Press the appropriate button
for the desired adjustment. Press the “MENU 2” button to scroll to
the next menu option.
3.8.2 A typical Monitor Setup Menu consists of the following modes
:
1. “OSD TIMEOUT”- Timeout period until monitor defaults out of
menu mode.
2. “BACKLIGHT”- Backlighting intensity.
3. “FACTORY PRESET”- All modes may be reset to the default
factory setting. Select either “YES” or “NO”.
4. “SOURCE PRIORITY”- Selects priority operating mode to “PC”
(personal computer) or “None”. Setting this mode to “PC” allows
user to normally view Composite Video until a PC laptop is
turned on, then the monitor will automatically switch to PC input
upon sensing VGA input.
5. “H-POS”- Adjusts viewing area horizontally.
6. “V-POS”- Adjusts viewing area vertically.
7. “SHARPNESS”- Adjusts picture sharpness.
8. “COLOR”- Adjusts picture color.
9. “TINT”- Adjusts picture tint.
10. “CONTRAST”- Adjusts picture contrast.
11. “BRIGHT”- Adjusts picture brightness.
The setup menu may vary slightly from monitor model to model. As
technology advances, additional features may be added to the
setup menu and existing features may be modified. DeCrane
Aerospace Audio International’s intention is to provide clear and
concise instructions on any new or modified feature in the setup
menu as these changes occur.
4.0
Instructions for Continued Airworthiness
No
periodic scheduled maintenance or calibration is required for continued
airworthiness of the LCDW-9320-101-x. If the unit fails to perform to
specifications, it must be removed and serviced by a qualified service facility.