DeCrane Aerospace Audio International LCDHW-420-BN1-x Installation Manual
Document # 540390, Rev IR, 08/2010
Page 6 of 16
3.1.8 The maximum length of the connection to PC Graphic (VGA) input
is 15 feet.
3.2
Unpacking and Inspection
3.2.1 Carefully open the packaging and remove the LCDHW-420-BN1-x.
Verify that all components have been included in the package per
the packing list. Inspect the unit for damage. Retain the packing
materials and packing list.
3.2.2 If damage has occurred during shipping, a claim should be filed
with DeCrane Aerospace Audio International WITHIN 24 hours and
a
Return Request Authorization Number
shall be obtained from
DeCrane Aerospace Audio International by contacting the Repair
Department at 501.801.8101. Repackage the unit in its original
packaging materials and return it to DeCrane Aerospace Audio
International following instructions given by the DeCrane
Aerospace Audio International representative. Refer to the front
cover of this manual for address. If no return is necessary, retain
the packing list and the packing materials for storage.
3.3
Cautions and Warnings
3.3.1 It is important to do a pin-to-pin power and ground check on all
connectors. Ensure that power and ground are applied only where
specified. Damage to the unit may result if power or ground is
applied to the wrong points.
3.3.2
DO NOT
connect or disconnect the monitor while power is applied.
3.3.3
DO NOT
remove any factory-installed screws. Damage to the unit
may result and void any warranties.
3.3.4
DO NOT
expose to moisture.
3.3.5
ESD
(Electro Static Discharge) guidelines shall be followed.
