M
Lithium Cell
3V
PROGRAMMING
BUTTON SPECIFICATION
Channel selection “+”
(P1+) button
Channel selection “-”
(P1-) button
Charging interface
Setting button (P1)
Radio antenna
Setting button
Down button
Stop button
Up button
Display
INITIAL FACTORY SET UP
REMOTE SETTINGS
1
1
3
5
3
2
2
4
6
4
PAIRING A REMOTE
JOG-MODE / CONTINUOUS-MODE
SETTING A FAVOURITE STOP POSITION
FINE-TUNING A TOP LIMIT
SETTING TOP LIMIT
SWITCHING DIRECTION (OPTIONAL)
SETTING SPEEDS
CLEARING A FAVOURITE STOP POSITION
FINE-TUNING A BOTTOM LIMIT
SETTING BOTTOM LIMIT
Note: After pairing a remote control device and before setting limits, the motor will be default to jog-mode.
To switch to continuous-mode, see
REMOTE SETTINGS STEP 1
Note: When in jog-mode, holding the up or down buttons will provide continuous-moving temporarily.
Note: If this process does not result in two steps and a beep, the minimum or maximum speed has been
reached.
Note: After setting top and bottom limits, the motor will automatically switch to continuous-mode.
To switch to jog-mode, see
REMOTE SETTINGS STEP 1
Note: Switching directions with a remote control device is only possible before setting top and bottom limits.
To switch after limits have been set, see
P1 BUTTON SETTINGS STEP 3
Step x1
Beep x1
Step x2
Beep x3
Release
P1
Press for 2s
within 10s
PAIRING
COMPLETE
Press
for 2s
Hold
for 5s
Press for 1s
Step
x1
Hold for 2s
Step x1, Beep x1
Step x2, Beep x3
CONTINUOUS
MODE
JOG
MODE
Run shade to
desired position
Press
for 1s
Step x1
Beep x1
Step x1
Beep x1
Press
for 1s
Step x2
Beep x3
Press
for 1s
FAVOURITE
SET
Hold
for 5s
Step x1
Beep x1
Hold
for 2s
Jog to desired
position
Step x2
Beep x3
FINE-TUNE
MODE
ENGAGED
TOP
LIMIT SET
Press
for 1s
Run shade to
top position
Step x2
Beep x3
Press
for 2s
TOP
LIMIT SET
Press
for 2s
Step x1
DIRECTION
SWITCHED
Press for 1s
Step x1
Beep x1
Press for 1s
Step x1, Beep x1
Step x1, Beep x1
Press for 1s
Press for 1s
Step x2, Beep x1
Step x2, Beep x1
DECREASE
SPEED
INCREASE
SPEED
Press
for 1s
Press
for 1s
Step x1
Beep x1
Step x1
Beep x1
Step x1
Beep x1
Press
for 1s
FAVOURITE
CLEARED
Hold
for 5s
Step x1
Beep x1
Hold
for 2s
Jog to desired
position
Step x2
Beep x3
FINE-TUNE
MODE
ENGAGED
BOTTOM
LIMIT SET
Press
for 1s
Run shade to
bottom position
Press
for 2s
Step x2
Beep x3
BOTTOM
LIMIT SET
P1 BUTTON SETTINGS
REMOTE SETTINGS (CONTINUED)
7
1
3
2
4
ADDING/REMOVING AN EXTRA REMOTE
SHORT PRESS FUNCTION
SWITCHING DIRECTION
SLEEP MODE
RESTORING FACTORY SETTINGS
METHOD 1
METHOD 3
METHOD 2
Note: When in jog-mode, holding the up or down buttons will temporarily provide continuous-moving.
Note: Sleep mode can be utilised to temporarily deactivate a motor’s radio functionality, allowing for multiple
motors to be added to a shared channel without disruption. Press P1 again to restore functionality.
Step x1
Beep x1
Step x1
Beep x1
Step x2
Beep x3
REMOTE
PAIRED
Press
for 1s
Press
for 1s
Hold
for 2s
Press P1
for 1s
UP / DOWN
/ STOP
Hold
for 10s
Step x3
Release P1
Beep x3
DIRECTION
SWITCHED
Step x1
Beep x1
Beep x1
Step x2
Beep x3
REMOTE
PAIRED
Hold
for 2s
Hold P1
for 2s
Release
P1
Step x1
Beep x1
Step x1
Beep x1
Step x2
Beep x3
REMOTE
PAIRED
Press
for 1s
Press
for 2s
Press
for 1s
Hold P1
for 6s
Step x2
Beep x2
SLEEP
MODE
Release
P1
Hold
for 14s
Step x4
Beep x4
FACTORY
SETTINGS
RESTORED
Decorquip Ltd
Rhymney House, Unit 8, Bedwas House Industrial Estate, Bedwas, Caerphilly, CF83 8DW. T: 029 2088 0811
Decorquip Ltd. hereby declare that the motor covered by these instructions (XL Roman Battery Motor 191713), is in
conformity with the essential requirements of the applicable European Directives and, in particular, the Electromagnetic
Compatibility Directive
2014/30/EU
, Machinery Directive
2006/42/EC
and Radio Directive
2014/53/EU
.
Damaged/unused electrical products and batteries are not be disposed with regular household waste. Dispose of this
motor in compliance with your authorities waste regulations. Alternatively, return your motors to Decorquip Ltd.
existing remote control device
remote control device to add/remove
TECHNICAL SPECIFICATION - XL ROMAN BATTERY MOTOR 191713
OUTPUT SPEED
28RPM
RATED TORQUE
2N.m
RATED VOLTAGE
12v
RATED POWER
14W
RATED CURRENT
1.16A
IP PROTECTION RATING
44
LIFTING CAPACITY
RUNNING NOISE
