43
TIP
If the power does not turn on
Is the power for the assistant controller turned on?
If the power for the assistant controller is turned on, the power for the controller will not turn on.
In this case, turn off the power switches on both controllers, and turn on the power for
the controller.
TIP
If the buzzer sounds and the wheelchair does not move
(a) Was the power turned on with the joystick tilted?
When you turn on the power switch with the joystick tilted, a safety device is engaged
to prevent the wheelchair from moving.
In this case, a buzzer beeps (a long “Pi—” sound) and the power lamp (green) flashes.
Release the joystick, turn off the power, and then turn it back on again.
(b) Are you tilting the joystick with the left and right clutches in the manual position?
This is a buzzer to warn you that the clutch has been disengaged. (Beeps “Pi Pi, Pi
Pi, Pi Pi”)
Turn off the power, switch the left and right clutches to the power drive position, and
then turn the power back on.
TIP
If the buzzer beeps while traveling
While traveling, if the load on the motor is too great, a buzzer (long Pi—, Pi—) sounds
continuously.
(a) Is the live load too great?
The maximum load is 125 kg for
E-Drive
24" and 100 kg for
E-Drive
16". Do
not exceed the maximum load.
(b) Are you trying to go up a steep slope?
The practical climbing angle is 6 degrees. Choose a travel route that does not exceed
6 degrees.
