background image

decoflame® Atlantic Series User Manual English – Version 3 – January 2013 

 

The bioethanol must be stored safely and out of reach of children. 

DO NOT

 

cover the fireplace.

 

DO NOT

 

place any inflammable materials or clothes on the 

fireplace.

 

DO NOT

 

place any pebbles or stones on the burner as these will crack and might 

cause injury or damage to the fireplace. Also, 

DO NOT

 

place any ceramic logs or pebbles on 

top of the burner as these will increase the combustion temperature, which increases the fuel 
consumption and might cause undesired micro-particles in the room air. 
 
Ensure that the room in which the fireplace is situated is well ventilated at all times during 
operation of your fireplace without causing any draught. Please refer to section 
"Specifications" for recommendations of suitable room sizes for your fireplace. 

The metal and glass parts of your fireplace can become hot during use. Avoid contact with 
those parts to avoid burning. 

DO NOT

 

mix bioethanol with other fuels. 

Always thoroughly follow the instructions on the packaging of the bioethanol. 

Bioethanol is extremely flammable. 

Avoid contact with eyes and skin. 

We recommend that people with breathing problems or asthma keep a window opened during 
the use of their bioethanol fireplace. 
 

Avoid draughts, as this can cause soot formation and increases the fuel consumption. 

 

MAINTENANCE 

The surface of the inner metal sheet at the back of the fireplace can change slightly with time 
due to exposure to the heat of the fire which leads to a slight change in colour or structure. This 
is to be considered normal wear and tear and does not constitute a product flaw or fault. We 
recommend cleaning the back with a dry sheet of kitchen paper towel followed by a well-wrung 
wet lint-free cloth. 

The burner is made of brushed stainless steel. You can clean it with a household detergent or 
kitchen paper towel to which you apply a small quantity of bioethanol or another alcohol-based 
product. 

QUESTIONS AND ANSWERS 

1. Where can I position the bioethanol fireplace? 

You may position the fireplace anywhere, as no chimney or flue is required. For example, you 

Summary of Contents for Athlantic Tower


















Reviews: