background image

DÉCO

FIRE

Page  1

–  Milano Series 

FIRE TABLES

  –

Assembly, Safety & Operating Instructions

FOR OUTDOOR USE ONLY

READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY 

OR USE. KEEP INSTRUCTIONS IN A SAFE PLACE 

FOR FUTURE REFERENCE. THIS APPLIANCE IS NOT 

DESIGNED FOR COMMERCIAL USE

WARNING

Improper installation, adjustment, alteration, service 

or maintenance can cause injury or property damage. 

Read the owner’s manual thoroughly before installing or 

servicing this equipment. If the information in this manual is 

not followed exactly, a fire or explosion may result causing 

property damage, personal injury or loss of life.

WARNING

Do not store or use any flammable liquids or gases in the 

vicinity of this appliance.  An LP gas cylinder not connected 

for use must not be stored in the vicinity of this appliance.

DANGER
If you smell gas:

1.  Shut off gas to the appliance.
2. 

Extinguish any open flame or ignition source

3.  If odour continues, keep away from the appliance and 

immediately call your local fire department

DANGER

CARBON MONOXIDE HAZARD 

This appliance can produce carbon monoxide, which has no 

odour. Using it in an enclosed space can kill you. Never use 

this appliance in an enclosed space such as a tent, car or 

basement. Do not bring this appliance indoors.

WARNING

The glass flame tube may break if it is wet while in use; 

never use the appliance while it’s raining or wet conditions 

are present. Do not splash any liquid on the appliance while 

it is operating or hot.

Summary of Contents for Milano DF102040

















Reviews: