FEATURES - OPERATIONS
TECHNICAL SPECIFICATIONS
• Amps: 12.5
• Wattage: 1500W (+5% –10%)
• Working voltage: 120V AC/60Hz
OPERATING INSTRUCTIONS
1. Carefully remove your heater from the box. (Please
save the carton for off-season storage.)
2. Make sure the unit is in the OFF (0) position before
plugging the heater into the outlet.
3. Place heater on firm level surface.
4. Avoid overloading your circuit by not using other high
wattage appliances in the same outlet. At 1500
Watts, this unit draws 12.5 Amps.
Mode Control
Turn the Mode Control to the desired setting:
0 - Off Mode
If you want to shut off the heater at any time of
operation, turn the Mode Control to
O
position. Power
indicator light will remain lit at all times indicating the
heater is plugged in.
FAN only Setting:
Turn the Mode Control to , the heater will run at
fan only operation without heat output.
HEAT Settings
To select heat settings, turn the Mode Control to
1
or
2
and there are 2 heat settings:
1 - Low Heat
The heater will run continuously at 750W.
2 - High Heat
The heater will run continuously at 1500W.
Figure 1
CONTROL PANEL
CLEANING/MAINTENANCE
During Season Care:
1. Always unplug the heater before cleaning.
2. Clean the unit with a soft cloth moistened with a mild
soap solution.
3. NEVER use abrasive or flammable solvents to clean the unit.
4. After cleaning, be sure to completely dry the unit
with a cloth or towel.
AUTO SAFETY SHUT-OFF
This heater is equipped with a technologically-advanced
safety system that requires the user to reset the heater if
there is a potential overheat situation. When a potential
overheat temperature is reached, the system will
automatically shut the heater off. It can only resume
operation when the user resets the unit.
RESET INSTRUCTIONS
If your heater shuts down:
1) Turn Control to OFF.
2) Unplug the unit and wait 30 minutes.
3) Plug in and operate normally.
TROUBLESHOOTING
If your heater fails to operate:
• UNPLUG THE UNIT and make sure the heater is
placed in an upright position.
• Make sure the electrical outlet or circuit breaker is
working.
• Check for obstructions. If you find an obstruction turn
the heater Off, and unplug the unit. Carefully remove
the obstruction and follow the reset instructions.
•
•
Make sure Mode Control is on Low or High setting.
Please DO NOT attempt to open or repair the
heater.
HEATER STORAGE
1. Store heater unit with cord in a cool, dry location.
2. We recommend storing the unit and cord in the
original package.
CLEANING / MAINTENANCE
TROUBLESHOOTING
If the heater will not operate, see specific
instructions on Auto Safety Shut-off.
