2917 Vail Ave.Commerce, CA 90040
•
800-613-3326
•
•
www.getdeco.com
2
INSTALLATION INSTRUCTIONS
Deco Lighting practices a program of continuous product improvement, and as a result product specifications change frequently. We reserve the right to change
product specifications without notice. Contact Deco for the latest product information.
D533-PRO
High Performance LED Canopy Light
Slipfitter Installation:
1. Unpack fixture from packaging. Fixture consists of the power supply(s) mounted on the back plate inside of the fixture. Surge protector
mounted on the mounting bracket (optional).
2. Remove rear cover plate screws.
3. Mount back plate to surface using the provided slots. Use temporary hanging cable and hook for ease of installation.
Electrical wire opening and pendant mount hole.
4. Connect the incoming electrical wires to the set of power wires on the LED power supply(s). Next connect the LED driver harness(s) to the
LED light engine(s) on main housing. The surge suppressor is an optional accessory that can be used in the system.
Warning!
Do not allow the fixture to hang from the harness.
This may cause damage to the circuit.
– OUT
+
OUT
– DIM
+
DIM
CONNECT TO 0-10V
DIMMING CONTROL
CONNECT
T
O
AC POWER
LED
DRIVER
LINE
LINE
NEUTRAL
NEUTRAL
WHI
BLK
BLK
WHI
GRN
GND
GRN
SP
GND
LED
LIGHT
ENGINE
black - line
white - neutral
green - ground
