background image

2917 Vail Ave.Commerce, CA 90040

 

 

800-613-3326

 

 

[email protected]

 

 

www.getdeco.com

1

INSTALLATION INSTRUCTIONS

Deco Lighting practices a program of continuous product improvement, and as a result product specifications change frequently. We reserve the right to change 
product specifications without notice. Contact Deco for the latest product information. 

D533-PRO

High Performance LED Canopy Light

1. Read carefully before installing fixture. Retain for future reference.

  

To prevent electrical shock, turn off electricity at fuse box before proceeding.

2. Failure to follow instructions may result in serious injury or death.

3. Upon receipt the fixture, thoroughly inspect for any freight damage which should be brought to the attention of 

the delivery carrier. Compare the catalog description listed on the package slip with the fixture label on the housing to 

assure you have received material.

4. This fixture must be wired in accordance with the international electrical code and applicable local codes and 

ordinances. Proper grounding is required to insure personal safety. Carefully observe the correct grounding procedure 

under installation section.

5. DECO luminaires may be damaged if connected to conduit systems containing water - Article 300-5G of National 

Electric Code requires that “Conduits or raceways through which moisture may contact energized live parts shall be 

sealed or plugged at either or both ends”.

*Deco Lighting assumes no responsibility for claims arising out of improper or careless handling or installation of this product.

General Wiring Diagram

Electrical Connection

1. Connect BLACK (line) driver lead to voltage supply Line position 

(HOT).

2. Connect driver WHITE lead to the NEUTRAL supply position.

3. Connect the GREEN ground lead to the supply ground lead.

If using 0-10V dimming:

4. Connect VIOLET lead to supply POSITIVE dimming lead.

5. Connect GREY lead to the supply NEGATIVE dimming lead.

If NOT using 0-10V dimming:

6. Ensure VIOLET and GREY 0-10V dimming leads are properly 

capped.

IMPORTANT SAFETY INSTRUCTIONS

Reviews: