Deco Gear DGBB01, Assembly Instructions Manual

Page: 8 / 14

STEP 6
Attach
Attach P11 Mechanical Scoring Arms and P18
Mechanical Scoring Arm Support Plates to the
P7 Backboard using H3 Bolts H7 Lock washers
and H5 Wing nuts as shown in FIGURE 6 .
P12 Rim and P14 Rim Support Plate
to the P7 Backboard using H3 Bolts, H7 Lock
Washers and H5 Wing Nuts as shown
in FIGURE 6.
Use T1 Phillips Allen Wrench and Plyers
(not provided) to tighten all Bolts.
FIGURE 7
P9
P7
STEP 7
Attach P9 Electronic Scorer and P10 Electronic
Scorer Face Plate to P7 Backboard as shown
in FIGURE 7.
NOTE: Place P10 Electronic Scorer Face Plate
into
P7
Backboard first, then carefully “press”
P9
Electronic Scorer onto the four tabs on
P10
.
You should hear the four tabs “snap”
into place.
Loop the P13 Rim Net through the ram horns
on the
P12
Rims as shown in
FIGURE 7.
P13
P10
NOTE:
Remove Protective
Coating before
assembly.
P11
P18
P14
P12
P7
H3
H5
H7
FIGURE 6
NOTE:
P11 Mechanical Scoring Arm
sensor plug must pass through
P7 Backboard and P18 Mechanical
Scoring Arm Support Plate.
Note: This is a special rim net
designed to avoid entanglement
with the mechanical scoring arm.`
Net does have a
top and bottom,
The long loops go
to the top.
7