background image

SHOWER INSTALLATION GUIDE

SHOWER INSTALLATION GUIDE

19

18

© Copyright Decina Bathroomware Pty Ltd 2016

© Copyright Decina Bathroomware Pty Ltd 2016

14

  WARRANTY

Decina Bathroomware Pty. Ltd. products carry the following warranties on  
manufacture and materials:

            SHOWER BASES                  SHOWER WALLS, SHOWER SCREENS & PANELS 

CONDITIONS
1. 

The Decina Warranty shall only apply where the product has been installed by a qualified tradesman and in full 
accordance with the Installation Instructions  and Statutory requirements.  The Warranty specifically 

exludes

 

damage discovered 

after

 installation.

2. 

Decina’s responsibility for claims relating to impact damage shall cease within 48 hours from delivery to the 
Reseller’s store.

3. 

The Warranty shall only extend to the supply of a replacement product or credit to the value of the purchase 
and specifically 

exludes

 consequential damage ensuing from the product application or use. The responsibility 

for the removal and replacement of the product shall be with the installer and/or owner or where the 
manufacturer accepts that the product is at fault, a maximum contribution to the removal and replacement 
costs will be $500. Where the installation requires a relocation of the waste by an offset device, Decina will not 
offer a warranty against leakage unless a “through” waste connector is used (Recommended brand is Tacron).

4. 

Colours shown on are indicative only.

5. 

Decina Bathroomware Pty Ltd reserves the right to vary specifications or delete models from their range 
without prior notification. As measurements may vary, it is highly recommended that the shower system is 
on-site before tapware is fitted.

13

  CLEANING & MAINTENANCE

If your Decina shower base or shower wall are given the proper care, the lustrous 
surface of the acrylic will retain its appearance for many years.
It is very easy to clean using water with a small amount of detergent or mild soap. 
Chamois, soft cloth or sponge is suitable for cleaning but cloths must never be used dry.

 DO NOT USE WINDOW CLEANER , BENZENE, TOLUENE, ACETONE, 
METHYL ETHYL KETONE OR STRONG CONCENTRATED ACIDS, ETC 

 
DO NOT USE ABRASIVE SUBSTANCES AND ABRASIVE CLEANERS. 

 
TO REMOVE PAINT, GREASE OR TAR USE A GOOD GRADE OF  
ISOPROPYL ALCOHOL.

Fine hairline scratches may be minimized by the use of a mild polish such as 
Brasso, which has a mild abrasive action and tends to fill small scratches to make 
them less visible.

Summary of Contents for Luna 1000 SB1000C3T












Reviews: