1.2.3 Selecting built-in programs
Enable Stand Alone Mode.
1.
Flip dip-switches 7, 8 and 9 (10-way function dip-switch) to select the desired program.
2.
1.2.4 Output Group Mode Setting
In this function, the dip-switches 1 and 2 (6-way mode dip-switch) are used to set your desired Output Group
mode.
1.)
1 Group Output Mode
is engaged by flipping the dip-switches 1 and 2 to the
“OFF” position. This mode has 1 group output. The signal on output 1~6 is identical.
2.)
2 Group Output Mode
is engaged by flipping the dip-switch 1 to the “ON” position
and dip-switch 2 to the “OFF” position. This mode has 2 group outputs, providing 3
identical outputs distributed over 2 groups: Output 1~3 are identical and Output 4~6
are identical.
3.)
3 Group Output Mode
is engaged by flipping the dip-switch 1 to the “OFF” position
and dip-switch 2 to the “ON” position. This mode has 3 group outputs, providing 2
identical outputs distributed over 3 groups: Output 1~2 are identical, Output 3~4 are
identical and Output 5~6 are identical.
4.)
6 Group Output Mode
is engaged by flipping the dip-switches 1 and 2 to the “ON” position. This mode
has 6 group outputs, which means the signal on output 1~6 is all individual.
1.2.5 Output Loading Mode Setting
In this function, the dip-switches 5 and 6 (6-way mode dip-switch) are used to set your desired Output Loading
mode.
1.)
RGB Output Mode
is engaged by flipping the dip-switches 4 and 5 to the “OFF” position. One output with
RGB control is controlled by 3 channels separately.
2.)
WHITE Output Mode
is engaged by flipping dip-switch 4 to the “ON” position and dip-switch 5 to the
“OFF” position. One output with RGB control is controlled by one channel and the output of RGB is identical.
3.)
COOL WHITE and WARM WHITE Output Mode
is engaged by flipping dip-switch 4 to the “OFF” position
and dip-switch 5 to the “ON” position. One output with Cool White and Warm White is controlled by 2
channels. The output with Cool White is controlled by channel 1, and the output of RB is identitcal. The
output with Warm White is controlled by channel 2, and the output is G.
4.)
RGB Output Mode
is engaged by flipping the dip-switches 4 and 5 to the “ON” position. One output with
RGB control is controlled by 3 channels separately.
000
100
010
110
001
101
011
111
0%
100%
1 2 3
ON
FADE TIME
"0" = "OFF" position
"1" = "ON" position.
(Dip Switches 10 = off)
1. The Stand Alone Mode enables;
2. Thus, flip the dip-switch 4,5 & 6(10-way Function Dip Switch)to adjust a desired level for chasing speed.
4 5 6
ON
SPEED
000
100
010
110
001
101
011
111
0.1S
0.2S
0.5S
1S
5S
10S
20S
30S
"0" = "OFF" position
"1" = "ON" position.
(Dip Switches 10 = off)
1. The Stand Alone Mode enables.
2. Thus, flip the dip-switch 1,2 & 3(10-way Function Dip Switch) to set a desired level for fade time.
-5-
5.2.1 Setting fade time
5.2.2 Adjusting chase speed
14%
28%
43%
57%
71%
86%
1. The Stand Alone mode enables;
2. Thus, flip the dip-switch 7,8 & 9 (10-way Function Dip Switch) TO select the desired program.
5.2.3 Selecting Built-in programs
000
100
010
1
2
3
7 8 9
ON
PROGRAM
(Dip Switches 10 = off)
110
001
101
011
111
4
5
6
7
AUTO
"0" = "OFF" position
"1" = "ON" position.
AUTO=a sequence of 7 programs
1.)
RGB Output Mode
is engaged by flipping the dip-switch 4 and 5 to the "OFF" position, one output with
R.G.B. Control is controlled by three channels separately.
In the function, user can flip the dip-switch 5 & 6(6-way Mode Dip Switch) to sel the desired Output Loading
Mode.
5.2.5 Output loading Mode Setting
1 2 3 4 5 6
1
Red+
White +
Warm White +
Blue +
2
Red -
White -
Warm White -
Blue -
OUTPUT TERMINALS
3
Green +
White +
White +
Red +
4
Green-
White -
White -
Red +
5
Blue +
White +
Warm White +
Green +
6
Blue -
White -
Warm White -
Green -
OUTPUT
4 5
1 =ON
0=OFF
00 RGB
10 WHITE
01 WHITE&WARM
11 RGB
-6-
5.2.4 Output Group Mode Setting
In the function, the dip-switch 1& 2 (6-way Mode Dip Switch)is used to set your desired Output Group mode.
MODE
00 1 Group
10 2 Group
01 3 Group
11 6 Group
1 2
1 =ON
0=OFF
1.) 1 Group Output Mode
is engaged by flipping the dip-switch 1& 2 to the "OFF"
position, has 1 group output and Output 1~6 is identical.
2.) 2 Group Output Mode
is engaged by flipping the dip-switch 1 to the "ON"
position and the dip-switch 2 to the "OFF" position, has 2 group output and has
3 identical outputs distributed over 2 groups, Output1~3 is identical, and Output
4~6 is identical.
3.) 3 Group Output Mode
is engaged by flipping the dip-switch 1 to the "OFF"
position and the dip-switch 2 to the "ON" position, has 3 group output and has
2 identical outputs distributed over 3 groups, Output1~2 is identical, Output 3~4
is identical and Output 5~6 is identical.
4.) 6 Group Output Mode
is engaged by flipping the dip-switch 1& 2 to the "ON" position, has 6 group output
and Output 1~6 is not perfectly identical.
2.) WHITE Output Mode
is engaged by flipping the dip-switch 4 to the "ON" position and the dip-switch 5 to
the "OFF" position, one output with R.G.B. Control is controlled by one channel and the output of R.G.B. Is
identical.
3.) COOL WHITE & WARM WHITE Output Mode
is engaged by flipping the dip-switch 4 to the "OFF" position
and the dip-switch 5 to the "ON" position, one output with Cool White & Warm White is controlled by two
channels. The output with Cool White is controlled by Ch 1, and the output of R.B. Is identical; the output
with Warm White is controlled by Ch 2, and the output is G.
4.)
RGB Output Mode
is engaged by flipping the dip-switch 4 and 5 to the "ON" position, one output with
R.G.B. Control is controlled by three channels separately.
1.)
RGB Output Mode
is engaged by flipping the dip-switch 4 and 5 to the "OFF" position, one output with
R.G.B. Control is controlled by three channels separately.
In the function, user can flip the dip-switch 5 & 6(6-way Mode Dip Switch) to sel the desired Output Loading
Mode.
5.2.5 Output loading Mode Setting
1 2 3 4 5 6
1
Red+
White +
Warm White +
Blue +
2
Red -
White -
Warm White -
Blue -
OUTPUT TERMINALS
3
Green +
White +
White +
Red +
4
Green-
White -
White -
Red +
5
Blue +
White +
Warm White +
Green +
6
Blue -
White -
Warm White -
Green -
OUTPUT
4 5
1 =ON
0=OFF
00 RGB
10 WHITE
01 WHITE&WARM
11 RGB
-6-
5.2.4 Output Group Mode Setting
In the function, the dip-switch 1& 2 (6-way Mode Dip Switch)is used to set your desired Output Group mode.
MODE
00 1 Group
10 2 Group
01 3 Group
11 6 Group
1 2
1 =ON
0=OFF
1.) 1 Group Output Mode
is engaged by flipping the dip-switch 1& 2 to the "OFF"
position, has 1 group output and Output 1~6 is identical.
2.) 2 Group Output Mode
is engaged by flipping the dip-switch 1 to the "ON"
position and the dip-switch 2 to the "OFF" position, has 2 group output and has
3 identical outputs distributed over 2 groups, Output1~3 is identical, and Output
4~6 is identical.
3.) 3 Group Output Mode
is engaged by flipping the dip-switch 1 to the "OFF"
position and the dip-switch 2 to the "ON" position, has 3 group output and has
2 identical outputs distributed over 3 groups, Output1~2 is identical, Output 3~4
is identical and Output 5~6 is identical.
4.) 6 Group Output Mode
is engaged by flipping the dip-switch 1& 2 to the "ON" position, has 6 group output
and Output 1~6 is not perfectly identical.
2.) WHITE Output Mode
is engaged by flipping the dip-switch 4 to the "ON" position and the dip-switch 5 to
the "OFF" position, one output with R.G.B. Control is controlled by one channel and the output of R.G.B. Is
identical.
3.) COOL WHITE & WARM WHITE Output Mode
is engaged by flipping the dip-switch 4 to the "OFF" position
and the dip-switch 5 to the "ON" position, one output with Cool White & Warm White is controlled by two
channels. The output with Cool White is controlled by Ch 1, and the output of R.B. Is identical; the output
with Warm White is controlled by Ch 2, and the output is G.
4.)
RGB Output Mode
is engaged by flipping the dip-switch 4 and 5 to the "ON" position, one output with
R.G.B. Control is controlled by three channels separately.
