03
OPERATION MANUAL
Before the first use, please clean all the detachable parts such
as Fasten the screw nut , Cutter, Blade,Crusher bar,Sticky
tube,Pressure bar,Filler,. the blade is sharp, ensure that your
hands do not be hurt.
BLENDING
1. Assemble the ream meat tube into the main machine. Press
the release button with thumb one hand (see arrow 1 of fig.1),
and hold the ream meat tube with the other hand, insert it
into the hole of the main machine and turn it anti-clockwise
until it cannot move any longer (see arrow 2 of fig.1). Release
the release button, the ream meat tube is fixed on the main
machine.
2.Assemble the ream meat rod, blade, blade disk and lock nut
as illustrated as figure (see fig.2) before ream meat tube.and the
appliance can be used now.
Note: Make sure the edge of blade toward the blade disk when
assembling. Never assemble the blade reversely.
Caution: Make sure the appliance is unplugged when
assembling.
3. Put the funnel on the ream meat tube.
4.Ensure that the rocker switch is set at “O” position, then plug
in power supply.
5. Press the rocker switch to “ON”position (the ream meat
rod and the blade turns anti-clockwise), when the appliance
operates normally, put the meat piece into funnel, then press
the food pusher to the lowest position.
Summary of Contents for KUMG004W
Page 1: ...KUMG004W MEAT GRINDER ...
Page 4: ...02 KNOW YOUR MEAT GRINDER ...
