decakila KUJC002M, Manual

Page: 7 / 12

03
afterwards. None of the recipes in this user manual constitute
heavy loads.
Do not remove the pulp container when the appliance is
operating.
Always unplug the appliance after use.
dealer.
5 .Snap the two lid locking clip onto the lid to lock it into place
(‘click’)
(1)Align the groove in the pusher with the small protrusion on
the inside of the feeding tube and slide the pusher into the
feeding tube
(2)Make sure the lid locking clip are locked into position on
either side of the lid.
6.Place the juice jug under the spout.
Place the lid on the juice jug to avoid splattering or if you want
to store the juice in the refrigerator.
The appliance will only function if all parts have been properly
assembled and the lid has been properly locked in place with
the lid locking clip.
1.Wash the fruit and/or vegetables and cut them into pieces
that fit into the feeding tube.
2.Make sure the juice jug has been placed under the spout.
3.Turn the control knob to setting 1 (low speed ) or 2 (normal
speed) to switch on the appliance.
Speed 1 is especially suitable for soft fruits and vegetables
such as watermelons, grapes, tomatoes, cucumbers and
raspberries. Speed 2 is suitable for all kinds of fruits and
vegetables.
1.Wash all detachable parts (see chapter ‘Cleaning’).
2.Pull the mains cord out of the cord storage compartment at
the back of the appliance.
3 .Place the juice collector into the appliance
(1)Place the pulp container by tilting it forwards slightly
(2)Insert the top end of the pulp container first and then push
home the bottom end.
To empty the pulp container while you are juicing. Switch off
the appliance and carefully remove the pulp container.
Note: Reassemble the empty pulp container before you
continue juicing.
4 .Put the filter in the juice collector
(1) Hold the lid over the filter and lower it into position
(2)Make sure the filter is fitted securely onto the driving shaft
(‘click’)
Always check the filter before use. If you detect any cracks or
damage, do not use the appliance and contact the nearest
Manufactory service centre or take the appliance to your
PREPARING FOR USE
USING THE APPLIANCE