03
USING YOUR JUICER
Before the first use, Clean top lid, Reamer, Filter, and cup thoroughly with warm water.
Place the cup on the base,then assemble the sieve into the spindle cap,after assemble Reamer into the spindle cap,assemble in
sequence.
Halve the fruit, put the fruit on the Reamer and press it lightly and the motor start running. Then the extracted juice will flow into
the cup through the sieve, the roughness flesh and pith will be remained on the sieve. The motor may rotate in different
direction.
Caution: Never exert excessive force when pressing the fruit to prevent from blocking and damaging motor.
Once completing the squeezing, release the hand from the Reamer and the motor stop running. The appliance is in the idle state.
You may restart it again at any time by pressing the Reamer down.
After extract juice, first put the Reamer away, then pour juice.
Caution: The appliance shall be on 15s, off 15s, and after 10 consecutive cycles, the appliance must be cooled down for 30
minutes.
Note: the max capacity of the cup is 0.8L. Make sure do not overfill the cup.
When operating is completed or do not use the appliance, unplug the appliance.
If depositing the juice in the cup, make sure the top lid is in place. For remaining clean and sanitation, do not deposit the juice in
the cup for long time.
Caution: when juicer is not use, never hold the two pins of plug while turn the Reamer by hand as this may result in electric
shock.
