11
the amount of grinded beans or reset the grinding amount
to ensure that the amount of powder is about 13g (about 10
seconds)
Note: Baking degree and freshness of coffee beans will affect
the coffee taste, you may need to fine-tune the grinding
coarse degree.
5.Take out the funnel, tap the funnel on the desktop, and pre-
spread the coffee powder in the filter;
6.Use a coffee tamper to apply a force of about 12.5kg to
compact the coffee powder as following steps.
7.Turn the funnel counterclockwise into the funnel bracket,
and select the corresponding SINGLE or DOUBLE button
according to the filter size.
Note:
When the bean box is not installed, the bean box indicator
light keep alight red.
When the grinder function cannot be used normally, the bean
box indicator light flashes with three beeps to protect the
grinder system;
when the grinder works continuously for 3 minutes and the
intermediate rest time is less than 6 minutes, the machine
will limite the use of grinding function. After grinding rest time
reaches 6 minutes, the machine will automatically release the
limitation, the grinder can resume to work again.
When the grinder is limited to use, press the GRIND button, the
buzzer will sound three times, and the GRIND indicator light
will flash.
Grinding time adjustment: you can set the grinding time as
per your need. Keep pressing the GRIND button, the GRIND
indicator light and the bean box indicator light flash,
the grinder starts to work. When it runs to the time you want,
release the GRIND button, the buzzer will sound, the machine
will record the time. Next time you grind, the grinder will run
for the set time. The machine could only record grinder time
over 5 senconds; if less than 5 seconds, the machine cannot
record it.
Note: press ON/OFF+GRIND button at the same time, you can
restore the grinder to factory setting.
CLEAN THE GRINDER
When using the bean grinder, influenced by coffee beans and
some other factors, powder outlet channel may be blocked.
Please clean the powder outlet channel in time when following
circumstances occur:
Clean the powder outlet and grinder at least once every two
