decakila KUCF005B, Manual

Page: 14 / 24

9
KNOW YOUR KETTLE BEFORE INITIAL USE
If you are using the kettle for the first time, it is recommended
that you clean your kettle before use by boiling a full kettle of
water twice and then discarding the water.
OPERATION
• To fill water into the kettle, remove it from the power base
and open the lid by lifting the lid handle, fill with the desired
amount of water to the kettle. Always fill the kettle between
the minimum (0.5L) and maximum (1.7L.) marks. Too little
water will result in the kettle switching off before the water
has boiled.
NOTE: Do not fill the water over the maximum level, as water
may spill out of the spout when boiling. Ensure that the lid
is firmly in place before connecting the power cord to the
outlet.
• Close the lid. Position the kettle on the power base in
place. Make sure the kettle contact with the power base
completely.
• Connect the plug into a power outlet. Press down the switch
to “I” position and the switch light illuminates. Then start to
boil the water. The kettle will switch off automatically once
the water has boiled and the switch light extinguishes.
MAX
MIN
1.7L
1.5L
1.0L
0.5L