5
CONNECTING SENSORS
10HS
Figure 1: Stereo Connector
The following software support the 10HS sensor:
•
ECH2O Utility 1.12 or greater
•
ECH2O DataTrac 2.77 or greater
Connecting to a non-Decagon Logger
Customers may purchase 10HS sensors for use with non-Decagon
data loggers. These sensors typically come configured with stripped
and tinned (pigtail) lead wires for use with screw terminals. Refer
to your distinct logger manual for details on wiring.
Pigtail End Wiring
Figure 2: Pigtail End Wiring
Connect the wires to the data logger as Figure 2 shows, with the
supply wire (white) connected to the excitation, the analog out wire
(red) to a analog input, the bare ground wire to ground as illustrated
below.
10
