9
2) Activate the power switch (front panel) to ON position. A delay of 3 to 4
seconds is required for stabilization. The
Tuning Lock
indicator (front panel)
shall lite up and activate the output section as soon as the stabilization delay is
over. You are now ready to broadcast.
C)
RF power level programming
The transmitting RF power is user programmable in the range of 0 Watt to
1.8Watts, in increments of 50 miliWatts, via a set of 3 decimal rotary switches
(below the
POWER
digital readout) on the front panel (FM-800 & FM-850).
1) Determine the RF power of your choice and compose in a sequential fashion
(from far left switch to right), the number of your chosen RF power.
Ex: 500 miliWatts: First switch (far left) = 0, Second switch= 5 and Third
switch = 0. Basically, what you are doing, is that you directly write the RF
power number in Watts (500 miliWatts =.050 Watts).
Notice:
While it is possible to select and read an RF power above the restricted
frequency range (Ex: 1.95 Watts), the system will always validate the highest
permissible RF power instead. The highest being 1.8 Watts.
NOTICE: It is possible to select a new RF power while the unit is powered
(power switch on).
SECTION 6
APPLICATIONS
Applications for
DECADE
transmitters are almost unlimited, but here are a few very
popular ones. With
DECADE
transmitters, a whole new world opens up for hearing
impaired people, and most of all for people demanding the best sound reproduction
possible, regardless of the environment.
In Canada: Please contact your nearest office Industry Canada to obtain information
concerning the need to hold a permit or license based on your particular application.
In USA: Please contact your nearest office FCC to obtain information concerning the
need to hold a permit or license based on your particular application.
CHURCHES:
Connected to the church sound system, the transmitter
broadcasts the oral and musical content of the celebrations