42
Alpha SRM Console Firmware
2.
Return to Section 7.4.2 .
•
The fail-safe booter can also be started manually as follows:
1.
Add jumper CF7 as described in Section 3.6.
2.
Insert the Alpha SRM Console firmware update diskette into the diskette
drive.
3.
Return to Section 7.4.2 .
7.5 Installing the DIGITAL UNIX Operating System
This section supplements the DIGITAL UNIX Installation Guide for installing the
DIGITAL UNIX operating system on an AlphaPC 164 motherboard system.
Note:
If you already have a previous version of DIGITAL UNIX installed,
see the DIGITAL UNIX Installation Guide for information on how to
upgrade to a new version of the operating system. Be sure to review
the preinstallation tasks, which are covered in the DIGITAL UNIX
Installation Guide.
7.5.1 Requirements
You need the following hardware and software to install the DIGITAL UNIX operat-
ing system on an AlphaPC 164 motherboard system:
•
A minimum of 32MB of main memory; 64MB is recommended
•
A SCSI hard disk capable of storing the supported software subsets
–
A minimum of 425MB disk space for a default installation (that is, the man-
datory subsets only)
–
A minimum of 680MB of disk space for an advanced installation (that is, all
BASE software subsets); a 1GB (or larger) SCSI hard disk is recommended
Note:
IDE disks are not supported.
•
Supported load devices
–
SCSI CD–ROM drives capable of reliably reading in 512-byte block mode
or
–
A network interface
