Co ntrol Knob Fu n ct i o n s
1
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
HI - INPUT
Connect your guitar either to the
HI or LO input. Use the HI input for
passive guitars to achieve best gain.
2
LO - INPUT
The LO input is best for active
guitars (built-in preamp).
3
VOLUME (Clean)
Select the desired volume for your
CLEAN sound. This only effects
your volume when the select
switch is left in the out position.
4
SELECT (Switch)
Switch between CLEAN and
OVERDRIVE sound. When the
SELECT switch is pressed, the
overdrive channel is engaged.
5
DRIVE CONTROL
Controls the level of distortion and
g i ves you sounds from a slight
overdrive to a powerful distortion.
6
SHIFT
The Shift control is a special
designed electronic circuit to select
different colors of overdrive.
7
VOLUME (Overdrive)
This control sets the volume level
for the overdrive channel. This only
effects your volume when the
select switch is pushed in.
8
BASS
This control allows a total range of
30dB of boost or cut at a frequency
of 120Hz. Due to the high amount
of low fre q u e n c i e s, you may
decrease it at high volumes.
9
MID
Set this control to your desire d
amount of MID frequencies. In center
position it is “flat” (No boost or cut).
1 0
TREBLE
Adjust the high frequencies with
this control to customize yo u r
sound.
1 1
POWER LED
This LED indicator lights up when the
Mean 16 amplifier is switched ON.
1 2
PHONES
Insert the plug of your headphones
to this jack. The built-in speaker
will be switched off.
1 3
EXT. SPEAKER (on backside)
For external speakers (4
˜
8
Ω
) .
Switches the internal speaker off!
1 4
POWER (on backside)
This switch is used to turn the
Mean 16 amplifier ON.
MASTER EQ
Tone controls Bass, Mid and Treble work for both channels!
