AG-30 Front Panel
HEADPHONES:
This jack provides a stereo signal to drive headphones. The use of this jack will disengage the amplifiers internal speaker.
INPUT
: Instrument input. Designed for both active and passive pickups.
EFX SEND
: This jack provides an unbalanced output signal from the preamp for supplying signals to external low-level effects or signal processing
equipment. This signal is “pre” tone controls. (The tone controls will not affect the EFX SEND signal)
EFX RETURN
: Input for returning signals from external low-level effects or signal processing equipment.
VOLUME:
Adjusts the overall loudness of the amplifier.
BASS:
Adjusts the amount of cut or boost in the low frequency range.
TREBLE
: Adjusts the amount of cut or boost in the high frequency range.
HZ –
(NOTCH FILTER)
:
Provides selectable frequency shift of the 18db cut NOTCH FILTER from 100Hz - 350Hz to eliminate resonant feedback.
ON/OFF
– (NOTCH FILTER)
:
This toggle switch enables or disables the notch filter control.
SHAPE
: ON/OFF This toggle switch enables or disables the SHAPE control. The shape control is a mid dip control. In the on position the mid
frequencies will be cut and the high and low frequencies will be boosted.
POWER
: This rocker switch turns the AC power ON and Off. When ON the switch will illuminate and the unit is ready for play.
AG-30 Back Panel
AC INPUT:
Connect the female end of the AC line cord here. Connect the male plug to a suitable source of line voltage. Refer to the voltage
information on the back of the amplifier for its voltage and current requirements. This connector also acts as the main fuse holder and includes a
compartment for a spare fuse.
LINE OUT:
This jack provides an unbalanced out put from the preamp that is post EQ and post EFX. This send can be used to feed a signal to
recording or sound reinforcement mixer. Additionally this output can be used to drive a slave amp or powered monitor cabinet
DIRECT OUT:
This XLR jack provides a balanced output signal used to feed recording or sound reinforcement equipment. This signal is post EQ
and post EFX.
