77
SUZUKI
GSX 1300R Hayabusa
: Assembly Guide
Place the sprocket onto the side of
the wheel, keeping the cutout and the
projection aligned.
Try turning the sprocket from side to
side (red arrows). If it doesn't move, it is
correctly seated. If it does, remove it and
check that the cutout on the sprocket fits
properly over the projection on the hub. If
not, you may need to widen the cutout or
reduce the size of the projection. Do this
very carefully, using a suitable small file.
13
14
This stage is now complete.
Keep the rear wheel in a plastic
bag, as the sprocket is not yet
fully secured.
Place the three pins into the corresponding holes, and push
them into place.
Turn the wheel around and locate the small projection on
the hub and the small cutout in the ridge of the sprocket
(both circled).
To fit the brake disc to the rear wheel, first line up the three
pins on the inside of the disc with the three holes on the
right-hand side of the hub, into which they will fit.
11
12
10
Stage
complete!
