14
STEP BY STEP
Hold the two halves of the silencer apart and insert
the right silencer inlet pipe into the rectangular hole
in the end.
Hold the right silencer inlet pipe in place and insert the
right exhaust pipe into the rounded hole. When both
pipes are in place, tighten the screw fully.
Step
6-F
Step
6-G
Then insert the left exhaust pipe (6-7)
into the rounded hole. Secure the left
end of the silencer with an MP01 screw.
Step
6-J
This is how the silencer (seen here end-on) and the pipes
should now look. Make sure the mounting pins (arrowed)
are all facing the same way.
Open out the other end of the silencer and insert the left
silencer inlet pipe (6-6) into the rectangular hole.
Step
6-H
Step
6-I
FM_06 12-15 StepbyStep.indd 14
05/11/2015 17:08
23
Step by step #06
Summary of Contents for MODEL SPACE Ford Mustang SHELBY GT-500 1967
Page 1: ...TM ...
