Closing door
Tracking door opening records
Whether designed with handle or not, close the door and
turn the key anticlockwise to lock the safe
Setting the master code
•
Firsly press key #, the screen will flash yellow
backlight and shows
“….”.
•
Input correct master code and confirm by #. If the
buzzer sounds, the screen shows
“
OPEN
”
and turn to
blue backlight at the same time.
•
Please press key * within 7 secondes and the display
shows
“….”.
Press 4
-
8 digits at random, and press #
button to confirm, the screen show
“
INTO
”,
which
indicates the acceptance and storage of the new code.
CAUTION: Press the reset button on the back of the door,
the display reads
“
CLEAR
”,
which will recall the user preset
user code 123 and mastercode
“86729888”
•
With the door open, after the
“
OPEN
”
disappaer, and
press
“0”
once when the screen on blue.
•
The display will show the last door opening record.
CAUTION: PASS 1 means the door was opened by master
code, while PASS 2 means the door was opened by user
’
s
code. PRESS
“0”
before
“
PASS
2”
disappear, the display will
show the last but one record, the last 14 records can be
tracked at most.
Hiding the code when opening the safe
If the costomer wants to hide the code when input the code
on the keypad, you could follow these steps each time
before open the safe.
Press # (the light shines yellow)
Press key * before press the code, then the screen will not
show the code,
Setting date and time
The original date and time is 00
-
01
-
01 (year,month
-
date),
00(hour
-
minute) and Mon (week).
•
When the standby mode, press the key * and the
display will read the date 00
-
01
-
01 at first, and then
changes to
“
SLEEP
”
in three seconds.
•
When date and time appears on the display, you may
press the # key once to switch between year–
month
and date or the hour, minute or week selected for
changing will start to flash.
•
Each time you press 8, the digit will increase by one;
each time you press 0 the digit will decrease by ne.
Alarm
If the wrong code is entered 3 times consecutively, the
alarm will sound for 60 secondes. If press key
“0”,
the
display reads
“
BELL ON
”,
which means the alarm device is
activated. The alarm will sound for 60 secondes when been
shaking, striking and moving. The sound will stop 60
seconds later.
