0
3
M
A
T
T
H
E
W
H
I
L
T
O
N
ASSEMBLY INSTRUCTIONS CONTINUED
LIGHT EXTENDING TABLE
2) ATTACH LEGS AND CROSS BEAM TO TABLETOP
Place the tabletop upside down a clean, soft surface such as
blanket or carpet on the floor.
Match the number on the leg frames with the number markings on
the tabletop.
Align the holes on the cross beam and leg frames with the holes
on the tabletop. Insert washers and the M8 bolts (3 long into
the cross beam, 8 short into the legs)and tighten with an Allen
key.
d) Notice on the underside of the tabletop there are two re-
cessed holes. In these holes you will find a locking mechanism
which allows you to release the tabletop when desired, allowing
it to be opened.
Important: unlock mechanism only when the table is in the up-
right position.
detail
SALES@
DE
LA
ESP
AD
A.C
OM
DE
LA
ES
PA
DA
.C
OM
