User Manual
Edge 2-000 series (9FND)
Edge_2000_9FND_UserManual_5DUFNQ20_EN_v01-01.docx
Page 54 of 55
Machine Blocked
The coffee machine is locked intentionally
Consult the service engineer.
No coffee detected in brewer
Check if canister must be refilled. See paragraph
Fill the ingredient canisters.
Check if grinder runs to fill brewer.
Not all ingredients available
One or more canisters must be refilled.
See paragraph
Fill the ingredient canisters.
No water connected / No water in boiler
No water detected for more than 2 minutes.
First check if the water supply is opened / connected
Open the door of the coffee machine to display the service menu, wait 2 seconds and close
the door again to allow the coffee machine to re-activate itself.
If this does not help restart the coffee machine.
If problem persists consult the service engineer.
Open boiler leaking, inlet closed
A leak is detected.
Close water tap and consult the service engineer.
Place cup in center
Cup needs to be placed under the correct dispensing nozzle before the start button is
available.
If cup is placed in correct position clean the cup sensor.
Place cup right
Cup needs to be placed under the water dispensing nozzle before the start button is
available.
If cup is placed in correct position clean the cup sensor.
Water filter installed?
Consult the service engineer.
Replace water filter
Consult the service engineer.
Rinse brewer with tablet
Run the brewer cleaning cycle (again).
See Weekly maintenance from step 6
Shortcut temp.sensor
Consult the service engineer.
Startup problem
Open/connect the water supply and restart the machine.
If the problem persists consult the service engineer.
Temperature sensor disconnected
Consult the service engineer.
