Xtra.Sensor
-
User Manual
v1.2
5
1.2
Mounting
Each go-kart requires its own Xtra.Sensor. It is essential that the Xtra.Sensor is installed according
to the descriptions below, otherwise performance problems or even damage can be expected.
The most important rules of installation are:
•
The maximum distance between the loop antenna and the housing of the Xtra.Sensor is
20 cm.
•
For best performance the Xtra.Sensor must be mounted flat on the go-karts plastic floor
plate in line with the driving direction (printed arrow points to the driving direction). Metal
floor plates may reduce performance.
•
For the best performance keep the Xtra.Sensor as far away as possible from tubes, iron or
other electric conducting materials as well as the go-karts high current conducting cables.
The Xtra.Sensor can be fixated using 4 plastic screws or cable tie.
