COMPLETING THE LEFT FOREARM
1
Take the left forearm assembly and the
servo front panel supplied with this stage,
and line up the D-shaped servo shaft with
the correspondingly shaped socket on the
underside of the servo cover. Be absolutely
sure that the parts are set correctly together
to avoid damage to either part – for more
information, see the box about D-cuts on
the previous page.
5
Run the left elbow joint along the whole of the servo
cable, then fit it onto the top of the left elbow frame,
as shown.
6
The top edge of the elbow joint is moulded to
accommodate the upper tip of the servo cover fitted
in Step 2, so gently press these together.
2
Join the parts so that they fit
snugly together. Do not force
the parts as you combine them.
3
When you are certain that the parts
are set straight to one another, press
evenly on the panel to secure it to the
servo shaft.
4
Turn the assembly around so that the side from which the servo cable
emerges is facing you. Then, with the left elbow joint positioned as
shown, lower the part over the cable, which should run through the hole
in its centre.
88