Harley-Davidson FLSTF Fat Boy: Assembly Guide
169
Steps
1
Bring the left side of the swingarm to the engine block,
and pass the drive belt around the belt guard.
2
Position the deflector on the three supports indicated
by the arrows in the previous picture.
3
Make sure the belt passes freely through the slots in the
deflector, as shown.
4
Fit the support for the rear shocks onto the swingarm,
as shown in the photo.
The two sides of the swingarm are now mounted, but
they are not yet fixed. This will be done in the next stage.
5
6
Bring the two sides of the swingarm together,
sandwiching the deflector between them. Feed
the brake line through the frame. Align the holes
in the swingarm with the corresponding holes in
the engine block.
Deflector supports
