WARNING :
Do not attempt to lie down or move your head left or right while wearing the Brace.
IMPORTANT :
You MUST release the air completely out of the device before removal.
You can do so by pulling the air injection hose as shown above in Step 1.
Gently pull the Air Injection Hose to release any remaining air
from the Traction Belt. The Belt must be completely deflated
before application.
Connect the Traction Collar to the Fixed Chin Collar on one
side to prepare positioning on your neck.
Position the Fixed Chin Collar so that the chin fits comfortably
in the chin groove. Make sure the device is attached evenly
and is centered around your neck.
Connect Hand Air Pump to the Air Valve precisely attaching
the Air Injection Tongs with the Air Valve.
Proceed to slowly use the Hand Air Pump to inflate the belt.
Inflate the bladder at a rate that is no faster than 1 stroke in
each direction every 5 seconds.
Start with a low pressure (5 PSI) on the first day and gradually
increase to 7 PSI on the second day and then to 9 PSI on the
third day. Recommended usage is 7~9 PSI or less depending
on your comfort.
Wear for 15-30 minutes. You can adjust the air pressure at
anytime to your comfort level by momentarily pressing the Air
Valve to release air. Release pressure to reach a comfortable PSI
level if experiencing any discomfort.
8
How to use the product
Sitting or Standing Position
