5
ENGLISH
Using Vector in very cold conditions might temporarily shorten battery life
and could cause him to turn off. Battery life will return to normal when you
bring Vector back to higher ambient temperatures.
Using Vector in very hot conditions can permanently shorten battery life. Do
not expose Vector to high temperature conditions such as direct sunlight or
hot car interiors.
Avoid using Vector in areas with dust, dirt, or liquids as they can damage or
impede Vector’s gears and sensors.
MAINTENANCE
For best results, use indoors only. Never expose Vector to water. Vector is
built with no user serviceable parts. For optimal performance, keep Vector
and the sensors clean.
CAMERA / DISTANCE SENSOR
Lightly wipe Vector’s sensors (located on the face plate and chest) with a lint-
free cloth to remove any smudges or debris.
Avoid any contact or exposure that might scratch the lenses. Any damage to
the lenses has the potential to impair Vector’s capabilities.
CUBE BATTERIES
CAUTION -
Batteries should only be replaced by an adult.
To replace Cube batteries, please follow these steps:
1.
Loosen the screw using a Phillips head (PH1) screwdriver.
2.
Open cover and remove the battery.
3.
Replace battery with only 1.5 volt N type (910 LR1 1.5V, or E90 LR1 1.5V)
positive (+) side up (toward cover).
4.
Replace cover and tighten screw. Do not overtighten the screws.
5.
Lights will fl ash indicating that the battery is good and has been installed
correctly.
IMPORTANT CUBE BATTERY INFORMATION
•
Use only fresh batteries of the required size and recommended type.
ENGLISH