Diagnostic Devices, Inc.
www.prodigymeter.com
Prodigy
Meter
Owner’s Manual
18
Performing a Control Solution Test
Start with the meter off.
STEP 1: Insert Test Strip
Insert a test strip with the contact
bar end entering into the test slot
first. Push the test strip as far as it
will go without bending it. The meter
turns on automatically.
See Figure 16.
STEP 2: Mark as a Control Solution Test
After the
“ ”
symbol appears on
display, press the
“M”
button and
a
“ ”
symbol appears on the
display. With the
“ ”
symbol on
the display, the meter will not store
your test result in the memory.
If you decide not to perform a control
solution test, press the
“M”
button
again and the
“ ”
symbol will disappear.
See Figure 17.
Important
: Be sure that you are in Control Solution Mode so
that the test result will not be stored in the meter memory.
Figure 16
Figure 17
