S O F T W A R E I N S T A L L A T I O N
Data Device Corporation
BU-67121W Manual
Rev B – 6/16
32
Figure 22. Telnet Login
An
ls
command will allow you to see what directories are in your AIC. You will see
the directory
1553_429
. Within that directory you will see a
firmware
directory. See
Figure below.
Figure 23. Firmware directory on AIC
A
pwd
command will display the path where you currently are in the AIC. This path
and the firmware file name will be needed to flash the firmware on a card installed in
the AIC.
