The first line is always tagged with “ENCODE”. It describes the keyboard language layout of this
configuration. Currently it supports “EN” (US standard layout) and “SV” (Swedish layout). This is
marked in red box in the screenshot.
The lines in yellow box are backlight configuration. The backlight default mode (with tag
“BACKLIGHT_MODE”), backlight color (with tag “BACKLIGHT_COLOR”) and backlight default
brightness(with tag “BACKLIGHT_BRIGHTNESS”) can be set separately. backlight color is only
used in single color modes. With rainbow modes, the color will enumerate all RGB colors. The
default mode should be set to a mode ID 1 ~ 9. It will be set after the keyboard is powered on.
The backlight color is set with a standard RGB color code, use a 6-digit HEX number starts with
a ‘#’ symbol to indicate the color. Please check the actual value with RGB color picker.
The green box in the screenshot is layer declaration. They should start with tag “LAYER” and
followed by a number from 0 to 7. Layer 0 is default layer, which means after power on, or reset
layer, DDMilli will switch to this layer.
The lines marked in blue box are key definition lines. Each line refers to a row of keys on
DDMilli. Attention that in this file, all possible key positions should be explicitly defined. It might
be not mounted to a dedicated key in your setup, but you still have to define it in
dd_configuration.txt file. You could use the empty tag(…) as place holder for the empty
positions. For how to set the definition for each key position, please refer the “Tag list in
configuration file” chapter and “What’s more you should know” chapter.
The image below shows the key position groups. The positions in the same green box shares
the same key definition in configuration file.
7
Summary of Contents for DD Milli
Page 1: ...DD Milli User Guide G18 alpha DD Dev Group 2018 06...
Page 5: ...4...
