1. Parts List
Please check the parts in the package in comparison with the following list,make sure all of the parts
are in the package. Never use defective parts, never replace part with different specification.
2. Installation and operation instructions
Note: please read the instructions carefully before installation!
Step 2:
Install the wall plate. Put the wall plate
on the wall, and then screw four self-tap
screws into each plastic anchor through
metal washer to fix the wall plate onto the
wall.
Step 1:
Use the wall plate as a template to drill
four holes of diameter 10mm and 55mm
depth in the wall. Then wedge four
plastic anchors into the holes.
ENG
WALL
STEP-2
STEP-1
WALL
B
B
A
C
(G) M8x30
screws (4)
(F) M6x30
screws (4)
(A) M8x50 Self-tap
Screw (4)
(B) 10x50 Plastic
Anchor (4)
(H) Level (1)
(I) M6 screws (2)
(J)
Φ
6 Flat washer (2) (K) Knob (2)
(C)
Φ
8 Flat washer (4)
(E) 15mm Plastic
Sleeve (4)
(D)
Φ
8 Flat
washer (4)
Package W
Package M
Package C
