J
QM7x80 Self-Tap Screw (4)
(B)10x60 Plastic Anchor (4) (C)
Φ
8x16 Flat washer (8) (D)
Φ
6x12 Flat washer (4)
(F)M6x25 screws(4)
(H)M6x12 screws(4)
(I)M6 Nut (4)
(G)M8x25 screws(4)
(J)10mm Outside Wrench (1)
(E)12mm Plastic Sleeve (4)
STEP1
WALL
B
2. Parts List
Please check the parts in the package in comparison with the following list, make sure all of the parts
are in the package. Never use defective parts, never replace part with different specification.
3. Installation and operation instructions
Note: please read the instructions carefully before installation!
Step 1:
Use the wall plate as a template to drill
four holes of dia. 10mm and 80mm
depth in the wall. Then wedge four plastic
anchors into the holes.
1. Technical Parameter
Max VESA: 400×400
; Maximum load:40kgs.
ENG
