BLUETOOTH CONNECTION WITH THE APP:
The MAC address on the “Setting”-”About” page could help you
to identify your device on the scanning list.
After successfully pairing the smartwatch, every time that you will
open the App in the future, the smartwatch watch will automatical-
ly connect to the phone and the data can be synced by swiping up
and down from the main page in the App.
Remark: The product supports waterproof with IP68 level,
it is available to wear it while wash hands, 30min
swimming pool, in raining, etc.
Do not use it with saltwater or when have a hot
shower/bath or sauna, the vapors will get into the host,
scratch damage of peripheral components. All these are
beyond the scope of the warranty.
DOWNLOAD THE SMARTWATCH APP:
Scan the QR code to download and
install the APP, or search in your APP
Store or Play Store the name of the
APP "Da Fit".
Device requirements: iOS 8.0 and
above; Android 5.1 and above,
compatible with Bluetooth 5.0.
CHARGE AND ACTIVATE THE SMARTWATCH:
Before using the watch for the first time, you need to fully charge
the battery, use the magnetic charging cable provided to connect
the metal charging contacts on the back of the watch, connect the
other end of the charging cable to an USB charger or an USB
computer interface that provides a minimum of 5V/1A and a
maximum of 5V/2A.
The estimated time for a full charge is between 2-3 hours. To
extend battery life, never let it discharge to 100% and charge it
regularly, even if you are not going to use it.
Caution: Don’t connect the 2 pins of the magnetic
charging cable with conductive material at the same time,
it may cause a short circuit
The battery of smartwatch can be damaged or discharged
very quickly at very low or very high temperatures.
14
ENG
