manualshive.com logo in svg

DCS Paganini Upsampler, User Manual, Page: 17 / 29

Share
Download
DCS Paganini Upsampler User Manual Download Page 17

dCS Paganini Upsampler

 User Manual 

Software Issue 1.1x 

 

March 2011 

  
   

 
 

Filename: Paganini Upsampler Manual v1_1x.docx 

Page 17

 English 

version

 

 

 R

EAR 

P

ANEL

 

 

Figure 7 - Rear Panel 

 Digital Inputs 

All the digital inputs will accept up to 24-bit PCM data at 32, 44.1, 48, 88.2 or 96kS/s. 

The standard PCM inputs are 

AES

 on a 3-way female XLR connector (W), SPDIF inputs 

RCA1

 & 

RCA2

 on RCA phono connectors (V). 

The 

USB

 interface on a ‘B’ type connector (X) will accept uncompressed music data from a 

Windows™ PC, MAC™ or sound server equipped with a USB 2.0 interface.   

!

 

We have tested this interface with several common formats running on Windows™ Vista, 
Windows™ XP and MAC™ OSX but we cannot accept responsibility for correct 
operation with all source devices, operating systems or software. 

 

 Digital Outputs 

All of the outputs consistent with the selected output mode are active at the same time. 

All the single-wire PCM digital outputs generate 24-bit PCM data at 32, 44.1, 48, 88.2 or 96kS/s. 

!

 

The 

Paganini Upsampler

 does not have facilities to reduce the output word length of PCM 

data to less than 24 bits. It will not give good results with older DACs or other equipment 
that cannot process 24-bit data. ALL 

dCS

 equipment will accept 24-bit PCM data. 

The 

AES1

 and 

AES2

 outputs (R) can be used individually at up to 96kS/s or as a Dual AES pair at 

88.2, 96, 176.4 or 192kS/s. These outputs are disabled in DSD mode. 

!

 

For Dual AES operation at 88.2 or 96kS/s, the 

Dual AES

 menu page must be set to 

On

, 

otherwise both outputs will carry single AES data. 

2 SPDIF outputs are provided, 

RCA1

 and 

RCA2

, on RCA phono connectors (S). These outputs carry 

SPDIF data for output rates up to 96kS/s, even if Dual AES mode is set. They are disabled if the 
output is set to 176.4 or 192kS/s or DSD. 

Summary of Contents for Paganini Upsampler






























Reviews:

No comments