22
To connect your LINA Network DAC to your network:
1.
At the rear of the unit, connect an Ethernet cable to the
NETWORK socket.
2.
Connect the other end of the Ethernet cable to your router.
3. On your mobile device, connect to the same network as your router.
4. On your mobile device, open the Mosaic Control app and connect to your LINA
Network DAC.
5. To stream from internet services, your router must be connected to the internet.
Connecting a computer
You can connect a computer to the
USB 1 socket on your LINA Network DAC. For best results,
we recommend using a premium music streaming program instead of software included with
the operating system.
The
USB 1 socket can operate in two audio classes:
•
Class 1, which accepts data at up to 96 kS/s. No additional drivers need to be
installed on the connected computer.
•
Class 2, which accepts data at up to 384 kS/s, or DSD/64 or DSD/128 in DoP format.
A dCS USB Class 2 driver needs to be installed on computers running Windows
™
versions before Windows
™
10 Creator's Update. No additional driver needs to be
installed on Apple desktops and notebooks running macOS 10.6.3 or above.
The
USB 1 socket has been tested with various PCM streaming programs on
Windows
™
10, Windows
™
8.1, and macOS 10.11. However, the socket may not work
with all devices, operating systems, or software.
►
For more information, see "Setting the USB audio class" on page 36.
1.
Using a USB cable, connect a computer to the
USB 1 socket on the rear of the unit.
2.
Change the source input on the unit to USB / PC.
S
e
tt
in
g
u
p
LI
N
A
N
e
tw
o
rk
D
A
C
U
se
r
G
u
id
e